Today, we are so connected that even our watches need to be connected. The Apple Watch is a smartwatch developed by Apple Inc. It is the company’s first wearable device and comes in 3 different editions: Apple Watch, Apple Watch Sport, and Apple Watch Edition. Each of these comes with a variety of features and benefits depending on your needs. Moreover, the apple watch battery drain is one of the common problems among all users. Does your Apple watch battery drain faster than you expect? Do you feel like your watch drains more juice than it should? If yes, then you’ve just discovered why so many people have this issue with their watches! Here we reveal some tricks on how to fix the apple watch battery draining problem.
Why Is My Apple Watch Battery Draining So Fast?
There are a few things that could be draining your Apple Watch’s battery. One possibility is that you have too many apps running in the background. Another possibility is that the screen brightness is set too high. You can also check to see if there are any updates available for your watchOS and install them if there are. Finally, make sure you’re charging your watch correctly by following the instructions in the Apple Watch User Guide.
What’s Causing Your Apple Watch To Drain Battery Quicker?
- You have too many apps running in the background.
- You have the screen brightness set too high.
- You have updates installed for your watchOS and you haven’t installed them yet.
- The charge port is dirty or not properly seated in the charging dock, so it sends a signal to drain the battery faster than usual.
- Your watch has been dropped or banged up, so it’s sending a signal to drain your battery faster than usual.
How Should You Repair Or Replace It?
- If you find that your apple watch battery is draining fast, then you should consider replacing it. If you are not sure whether or not to replace the battery, then try using the watch for a few weeks and see how it works for you.
- If replacing your Apple Watch battery does not solve your problem, then try resetting it first. You can reset your Apple Watch by removing its back cover, which is located on the bottom side of the wrist strap.
- If resetting your Apple Watch does not solve your problem, then you can take it to an Apple Store. They will be able to fix your problem.
- If taking it to an Apple Store does not solve your problem, then you can try connecting it to another device for a couple of hours and see if this works for you.
- If connecting the watch to another device does not solve your problem, then try replacing the battery again and see if the watch starts working fine now.
- If replacing the battery again does not solve your problems, then consider removing it from the wrist strap and placing it on a flat surface for at least a week in order for it to discharge completely. After this period of time has passed, replace the battery and check if everything is okay now with your watch! then you can put it back on your wrist, and hopefully, it will start working fine again.
- If removing the watch from the watch strap does not solve your problem, then you need to upgrade to a new one. This will help you save money because these watches are very expensive!
What To Do When Your Apple Watch Drains Too Fast
Battery Status
The battery status of your watch has a huge impact on its life. If you have the latest Apple Watch, then you should check out your battery status from the “Settings” app. You can check it by going to “General”, then “About”, then “Battery.” You can also see the Apple Watch battery life in terms of the percentage of time remaining in the Control Center of your iPhone.
Battery Saver Feature
The Battery Saver feature is designed to preserve your watch when you are not using it and recharges it automatically when you don’t need it anymore. The feature is activated by default but can be turned off if you want to conserve more power for other functions such as receiving notifications or phone calls. To turn off Battery Saver, go to Settings –> Control Center –> Battery and turn off the toggle switch next to the Battery Saver option.
Turn Off Bluetooth and Wi-Fi Connectivity When Not Needed
On iOS 10 and later versions, Apple has added a new setting called Wi-Fi Assist that allows users to turn off their Wi-Fi when their device is not being used for a long period of time such as traveling or sleeping so that they can save more power while they are not using their devices at all times. The setting is available under “General –> Restrictions –> Restrictions (for. To turn off Wi-Fi Assist, go to Settings –> Control Center –> Battery and turn off the toggle switch next to Wi-Fi Assist.
Keep the Screen Off When Not Using It
The screen is always on when your watch is charging, so if you are not using it, keep it in the charger for a longer time period in order to save power.
Switch Off the Watch After Charging
You can also turn off your Apple watch automatically after charging if you want to save more power for other functions such as receiving notifications or phone calls. To do so, go to Settings –> Control Center –> Battery and turn off the toggle switch next to the “Auto-Lock” option.at you can save battery life. To turn off Wi-Fi Assist, go to Settings –> Control Center –> Battery and switch the toggle switch next to Wi-Fi Assist.
Turn Off Airplane Mode
When you are in a plane or other place where your watch does not receive any signals, then you can turn on airplane mode on your Apple Watch by going to “Settings” –> “Control Center” –> “Airplane Mode”. Turning on this mode will put your device into a low-power state that will prevent it from receiving notifications, calls, and messages while it is in airplane mode. However, this feature has its limitations as turning it on when your watch is in an area where it receives signals will result in it losing some of its battery life. You should also be careful about turning on Airplane Mode for too long as this may drain the battery quickly when you don’t need it.
Turn Off Location Services When Not Needed
Apple Watch has a feature called Location Services that allows users to track their location using the watch’s built-in GPS and cellular connection without switching them off manually one at a time. However, users should be aware that if they wish to track their location while they are walking or running outside without switching off the Location Services, then they can get additional battery drain due to the use of GPS and cellular connection while doing so.
How To Fix Apple Watch Battery Draining Problem?
Disable the Apple Watch
Most of us don’t even realize that we are using our watch when it drains all its power. However, there are certain times when your Apple Watch’s battery is drained and it may not be because you use it too much. It may be due to a software glitch or hardware defect in the device. The most common reason for a drained battery is because of third-party apps, which are often downloaded from the App Store, draining your battery. If you want to fix this problem, you should disable all unnecessary apps from your iPhone that use up precious power.
Replace the Battery
If the above step does not help you solve your apple watch battery drain problem, then you can try replacing the battery with a new one. However, this trick will only solve your problem temporarily as there is a possibility of losing data if you replace the battery without backing up all your data first! So if you do this step without backing up your data first, both old and new batteries will be deleted and replaced by default! So before changing out batteries make sure that you back up any important files on your Apple Watch such as photos or contacts! You can also consider taking out some money from an ATM so that even if all of your files get deleted during replacement, at least you will still have some money for living expenses until such time you can find another way to fix this issue!
Reset the Watch
If all of the above steps don’t work, then you can try resetting your Apple Watch to fix the battery drain problem. A reset will erase all data from your watch. However, Apple notes that if you have a newer version of the watch, resetting it may not work as it is possible that some data will be lost during this process! You should also back up any important data on your device before doing this step. If you have an older version of the watch, then this might not be a good idea as this would wipe out all data on your device!
Turn Off Bluetooth and Wi-Fi Connections to Your Watch
If you are using your Apple Watch for fitness or activity tracking purposes, then sometimes it will drain its battery even quicker than usual due to a constant connection with GPS and Wi-Fi components in addition to other sensors used in tracking activities like heart rate or distance traveled! So if you’re experiencing this issue with your Apple Watch (and it doesn’t seem to be related to anything else), try turning off wireless connections such as Bluetooth and Wi-Fi until it decides to charge itself again! You can also try turning off cellular connectivity while using the built-in GPS on your smartwatch too! photos, music, and videos.
Check for software updates
If you have a new Apple Watch, then it is possible that there is a glitch in the device that drains the battery fast. To fix this problem, you can try updating your watch software to the latest version available from Apple’s website. This will also help you fix other glitches and bugs on your watch as well.
Charge your watch fully before using it again
If none of these tricks work to solve your problem of apple watch battery drain, then consider buying a new charging case. These are specially designed for Apple Watch and make sure that the entire device gets charged at least once a day! Moreover, if you have an Apple Watch Sport or Edition model then you must charge both devices at least once every 24 hours so that they can last longer between charges! If none of these tricks work for you still check out our article on how to fix apple watch charging problems as well!
Conclusion
The Apple Watch is a feature-rich device that lets you manage your daily tasks efficiently. Although it has so many benefits, it can drain your battery. If you follow the tips mentioned above, you can fix the apple watch battery draining problem with ease.
